Ideal Response 80 & FF80 Gas Valve 075212

Product Overview

The Ideal Boiler Gas Valve (Part Number: 075212) is a gas-control component designed for Ideal Response 80 and Response FF80 boilers.

Identified in the manufacturer's documentation as a calibrated SIT gas valve (Reference: 0.828.113), this component forms part of the boiler's combustion system, controlling the supply of gas to the burner during ignition and normal operation.

The gas valve operates in conjunction with the boiler's electronic controls and associated safety devices, allowing gas delivery when the required operating conditions are satisfied and shutting off the supply when necessary.

Its calibrated gas-control mechanism supports appropriate gas delivery and burner operation according to the appliance's specified operating requirements.

Correct operation is essential for maintaining stable ignition, consistent burner performance and safe, reliable combustion.

ℹ️ Product Condition Options:

This part may be available in New or Refurbished condition. Please select your desired option from the dropdown menu above. Refurbished gas valves should be professionally inspected and tested to confirm their condition, correct operation and suitability for installation.

Technical Insight & Common Failure Symptoms

The Ideal Response 80 & FF80 Gas Valve 075212 is responsible for controlling gas delivery to the burner. It operates alongside the boiler's printed circuit board (PCB), ignition system and flame supervision controls to support the required burner operating sequence.

Electrical faults, internal mechanical deterioration, damaged connections or problems affecting the valve's gas-control mechanism may interfere with normal gas delivery, ignition performance or burner stability.

Possible symptoms that may indicate a faulty gas valve or associated combustion control problem include:

• Boiler failing to ignite despite receiving a heating or hot water demand.

• Burner failing to establish or maintain a stable flame.

• Repeated ignition attempts or unsuccessful burner start-up.

• Intermittent burner operation or unexpected shutdowns.

• Boiler entering an ignition-related safety lockout.

• Gas valve failing to respond correctly to operating signals.

• Incorrect gas pressure or gas delivery identified during professional testing.

• Abnormal combustion performance detected during servicing.

• Visible damage, corrosion or deterioration affecting the valve or its connections.

These symptoms do not necessarily confirm a faulty gas valve, as similar problems may result from the gas supply, ignition components, wiring, PCB, flame detection equipment or other combustion controls. Correct professional diagnosis should be carried out before replacing the component.

Safety Advice

Boiler gas valves are safety-critical components within gas-fired heating appliances. Inspection, removal, installation and adjustment must only be carried out by a Gas Safe registered engineer who is suitably qualified for the appliance and work being undertaken.

Always isolate the appliance's gas and electrical supplies before carrying out any work and follow the manufacturer's installation and servicing instructions.

Ensure the correct gas valve part number, appliance model, gas type and calibration requirements are verified before installation. Although part number 075212 is specified for both Response 80 and Response FF80 boilers, the manufacturer identifies specific installation requirements for the FF80 model.

Never modify or adjust the gas valve outside the procedures and specifications provided by the appliance manufacturer.

Appropriate gas-tightness testing, gas pressure checks, ignition testing, combustion analysis and operational safety checks must be completed before returning the boiler to service.

If a gas leak is suspected, do not operate the appliance and follow the appropriate gas emergency procedures.