How to reset a Worcester boiler
When you’re a homeowner, there are some important things that you need to know just in case they ever go wrong and resetting a boiler is one of those things. By understanding and looking after your Worcester boiler now, you could save yourself an expensive call out charge or repair bill further down the line. In this article, we will be explaining how to reset a Worcester boiler as well as some of the common error codes you might see come up.
Why is knowing how to reset a boiler important
Getting to grips with the workings of your boiler and being able to reset it, if necessary, could make sure you’re never left cold on a winter night. A lot of boilers lose power every now and then without there being a specific fault behind it, and simply resetting the system will rectify the issue.
However, if an error code comes up, then you will need to check your boiler manual to see what the problem is and potentially get in touch with a boiler repair engineer who will be able to look at it for you.
Resetting your Worcester boiler
If you need to reset your boiler, all you need to do is press and hold in the reset button which is usually located on the front of your boiler control panel. Hold down the button for around 3-5 seconds to give the system a chance to fully reset before you check to see if it is working normally. Some boiler models may come with a light rather than a reset button.
You can find this on the temperature dial, and it will require you to turn the dial fully down until it reaches the reset light. Once it is set on the reset light, keep hold of the dial there for 3-5 seconds before putting it back to its normal place and letting the boiler come back on.
Common Worcester boiler error codes
Worcester boilers are high quality and built to last, but like any other boiler, they do have a few common faults that you might expect to see on the display screen during its lifetime. The most common error codes are:
- EA: this means the boiler is not ignited, so you can try and reset it before seeking support.
- D1: this is alerting you that there is overheating or a damaged sensor, this requires expert assistance straight away.
- E9: this suggests possible damage to the main heat exchanger, a professional engineer is required to check this immediately.
- C1: this code will come up when you have a damaged fan, you should ask an expert engineer for support straight away.
- A1: this code means there isn’t enough water in the system, the pressure gauge should be checked and if the system is cold, you can re-pressurise the system. If this does not work, call out an engineer.
Keeping your boiler in good condition
One important thing that many boiler owners want to know is how to keep their boiler in good working condition so that it lasts for as long as possible and doesn’t end up costing you more money than you can afford. The best thing you can do to ensure this is get your boiler serviced every year.
An annual service will give you regular peace of mind that everything is working normally and potentially get ahead of any problems the engineer might find as they check the system. Most issues that do come up can be easily solved, in a lot of cases the engineer can carry out the work on the day after inspection.
What can NBS do for you?
At National Boiler Spares, we offer new genuine boiler parts for a wide range of systems whether you have the latest Worcester boiler model or an older version. In addition, we can also provide a refurbishment service for your old spare boiler parts at a fraction of the cost of new ones with a 12-month warranty for extra reassurance. Contact us today if you need help finding the right parts for your Worcester boiler.